Are you planning to do duct cleaning on your own? Well, DIY Duct Cleaning starts with cleaning the ventilation for proper airflow. This helps in saving a lot of money at the same time. You should clean the air ducts as much as possible to keep them free from dirt and debris. You are preventing a professional from coming to your place and cleaning. So, you should behave like a professional and clean the air ducts. Turn out the thermostat before cleaning the air ducts.
Steps to begin DIY Duct Cleaning:-
Gathering of all the equipment
Firstly, start by gathering all the equipment. You will need a manual vent brush along with soapy water. Then there is the vacuum cleaner and clean cloth. Also, take a cleaner with a brush attachment for cleaning air ducts. Finally, you will need a screwdriver to open the AC and ceiling vans.
Removing the duct covers
Duct Cleaning Melbourne next step is removing the vent covers. The floor registers are very easy to remove. You can lift them quickly, or there is a screwdriver to help. If the covers look extremely dirty, take them out and give them a good clean. Use the dust attachment brush to the vacuum before removing the covers.
You should wash the vent cover in warm soapy water. You can scrub if needed, but don’t do it harshly. If the cover is metal, you can put it in the washing machine for a quick clean.
Cleaning inside of the duct
Take the vent brush and go as deep with the brush as you can. Rotate the brush along the vent’s walls and give it a light touch. If you are harsh, then the ducts might get damaged. If the ductwork is exposed somewhere, tapping it a few times would work the most. Remove the brush after cleaning the vent correctly. If possible, get an extension hose to help with the cleaning. Read some insights on 5 Great Points to do regular Duct Cleaning at Home.
Wiping the rest
After you have vacuumed, clean the interior of the vents using a microfibre cloth. Rinse the fabric if needed and rewash it. Spray an all-purpose sprayer on the material and then wash it. This will help take out all the dirt from inside the ductwork. Clean all around the duct and the sides of the walls too.
Finish up with the cleaning
Lastly, put the vent cover back, and then you should turn on the thermostat. If there is any more debris left, it will get off if you turn the system on for about 30 minutes. Then, change the filters to get the extra dust collected.
You can do DIY Duct Cleaning Services egularly. Use all the specialized tools for the cleaning part. Clean the air ducts at least twice a year. If there are pets in your home, do it every season.
Conclusion
When the air ducts get clogged, water pressure gets into the walls. It causes mold and mildew. You can prevent it when you are careful. You can check our blog 3 Easy Ways To Avoid Dust From Entering In Your Ducts.
City Duct Cleaning Melbourne 